RED Smoke Alarm White with Photo-electric sensor (Fully approved to Australian Standard 3786:2014)

Fully approved to Australian Standard 3786:2014

Complementary
R10RF Smoke Alarm, Photoelectric, Wireless Interconnect, 3V Sealed Battery

Supply 3V DC Sealed Battery
Battery Type Lithium Battery
Battery Life 10 Year
Operating Current < 100mA at 3V
Standby Power < 0.04 mW
Detection Type Smoke
Function Available Hush Function
Self-test of smoke detection
Local alarm
Control Type Button for test/ hush function
Transmission Frequency 433.92 MHz
Number of Devices Up to 20 pieces
Operating Distance 30m indoor use line of sight
100m in free field
Pairing delay range 2 min maximum
Response time Approx. 8s
Noise level 85 dB at 3m minimum
Time delay range 10 min for hush
10 hr for do not disturb
Local Signal Sound : Alarm
Sound : Signal
Visual : 1 LED (red for warning and low battery)
Type of Installation Indoor
Device Mounting Surface
Mounting Support Wall-mount
Ceiling
Fixing Mode By screws
Diameter 140 mm
Height 39 mm
Red Smoke Alarms
Smoke Detector
Early detection of smouldering fires
and open fires
Photo-electric sensor
White
Set of 1

Environment

Ambient Air Temperature for Operation 0...45oC
Relative Humidity 5...95%
Standards AS 3786 : 2014 / amdt 2:2018