Satlink HD DVB-T HDMI Digital Modulator suits Foxtel IQ4/IQ3
Brand : SATLINK
- SKU:
- ST6503
- Availability:
- Usually ships in 48 hours
This HDMI modulator can take a 1080P HDMI signal from a source such as a Bluray Player or Foxtel Receiver and convert it to a High Definition MPEG4 DVB-T terrestrial signal to inject into an existing antenna network. In simpler terms, take the HDMI from a video source and plug it into the modulator. Then using coaxial antenna cable combine the signal into your TV Antenna network and watch that video source at every TV*!
*Please note the following important notes
1) this Modulator outputs a MPEG4 DVB-T Signal. Your TV/STB will need to have a MPEG4 tuner in order to work. If an error occurs such as "format not supported" or a blank screen unfortunately your TV is MPEG2 and not compatible with this modulator. You can get around this problem by using an MPEG4 DTV Set top box.
2) there is a slight delay between original HDMI signal and the DVB-T RF signal due to video processing, while not normally an issue, it will be evident when using a mouse on a NVR - If using a mouse, please run a two way hdmi splitter so lag is not an issue.
Features
Video Encoding H.264 MP@L 3.0/3.1/4.0 Auto detect and configure
Resolutions Input and output scanning format and frame rate change
Audio Encoding MPEGI layer 2, MPEG-2 AAC
MER ≥35dB
RF Frequency 50-860 MHz
Output Level 70dBµV
Australian Channel Plan
Specifications
Video
HDMI Encoding Section
Encoding H.264 MP@L 3.0/3.1/4.0
Interface HDMI*1
Resolution
Input / Output
720@50/60p
1080@50i/60i
1080@50p/60p
Aspect Ratio 16:9, 4:3
Bit rate 5.000~15 Mbps
Audio
Encoding MPEGI layer 2, MPEG-2 AAC
Sample rate 48KHz
Bit rate 64, 96,128, 192, 256, 320kbps
DVB-T Modulator Section
Standard DVB-T COFDM
Bandwidth 6M, 7M, 8M
Constellation QPSK, 16QAM, 64QAM,
Code rate 1/2, 2/3, 3/4, 5/6, 7/8.
Guard Interval 1/32, 1/16, 1/8, 1/4
Transmission Mode: 2K, 8K
MER ≥35dB
RF frequency 50-860MHz (Aus Plan)
RF output level 70-100dBµV
System
Management LCD + control buttons
Language English
LCN Insertion yes
Upgrade USB
General
Power supply DC 12V
Dimensions 120*100*28mm
Weight < 1kg