Gigabyte M30 500GB SSD, M.2 2280, PCI-E 3.0 x4, NVMe 1.3, Sequential Read ~3500 MB/s, Sequential Write ~3000 MB/s

Gigabyte M30 500GB SSD, M.2 2280, PCI-E 3.0 x4, NVMe 1.3, Sequential Read ~3500 MB/s, Sequential Write ~3000 MB/s FEATURES: Form Factor: M.2 2280 Interface: PCI-Express 4.0 x4, NVMe 1.4 Total Capacity: 500GB* Sequential Read Speed : up to 5,000MB/s** Sequential Write speed : up to 3,800MB/s** HMB (Host Memory Buffer) supported TRIM & S.M.A.R.T supported Energy-efficient Warranty: Limited 5-years SPECIFICATIONS: Interface PCI-Express 4.0x4, NVMe 1.4 Form Factor M.2 2280 Total Capacity 500GB NAND 3D TLC NAND Flash Sequential Read speed Up to 5,000 MB/s Sequential Write speed Up to 3,800 MB/s Dimension 80 x 22 x 2.3 mm Mean time between failure (MTBF) 1.5 million hours Power Consumption (Active) Average : R : 4W / W : 4W Power Consumption(Idle)(ASPT on) 20mW Temperature (Operating) 0°C to 70°C Temperature (Storage) -40°C to 85°C Warranty 1. Limited 5-years or 300TBW. 2. Limited warranty based on 5 years or 300TBW, whichever comes first. (*TBW is evaluated by JEDEC workload standard. ) *TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into a SSD before it is likely to fail. 3. When the usage of an NVME SSD as indicated by the 'Percentage Used' (SMART ID: 05) in SMART page of 'GIGABYTE SSD toolbox' reaches 100 means out of warranty. (A new unused product will show the number of 0) Note • Test system configuration: configuration may vary by models, we will choose the latest platform for verification. • Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0. • Speeds based on internal testing. Actual performance may vary. • 1GB = 1 billion bytes. Actual useable capacity may vary.