TV & SATELLITE

2 WAY SATELLITE DiSEqC SWITCH DiSEqC (Digital Satellite Equipment Control), pronounced "Die-Sec", is a special communicationprotocol for use between a satellite receiver and a device such as a multi-dish switch or a small dish antenna rotor...

The Zinwell low current quad output LNBF is used to connect up to 2 x PVR Foxtel or 4 standard receivers to a single dish. The LNBF is commonly used for the Foxtel and Aurora service on Optus C1 & D3, where customers need to connect multiple receivers...

10.7GHZ TWIN KU-BAND SATELLITE LNB - Aerial Industries. To receive satellite signals, you need a LNB (Low NoiseBlock). What this does is picks up all the signals being bounced off the dish and filters out selected frequencies and amplifies...

  KDPTSF FTA & SATELLITE DIPLEXER - KINGRAY The Kingray KDPTSF displexer is designed for peakperformance across the terrestrial & satellite bands up to 2400 MHz. This A class diplexer is compact in design with excellent screening...

Overview DSTD/MS SATELLITE & FTA DIPLEXER - JONSA Mix or separate Satellite and Terrestrial signals for RFdistribution Power passing from SAT IF Out to In and IN to SAT IF Out Terrestrial frequency: 5 - 862MHz Satellite frequency: 950...

Satellite/Cable and Free-to-Air Diplexer Combine FTA and Satellite/Cable transmission into one coax cable Split FTA and Satellite/Cable transmission from one coax cable into two Eliminates interference between Satellite/Cable signaland FTA...

The DC blocker is used to block dc voltages while allowing RF signals to pass. They are required when remote voltages need to be stopped before entering the inputs and outputs ofother components in systems.

  MS2X8 MULTISWITCH 2 WIRE 8 OUT Features For 8 subscribers or 4 IQ subscribers Remote powered by satellite receiver The IF polarity selection is controlled by the remotevoltage provided by the receiver: < 14.5 V =...

  MS2X4 MULTISWITCH 2 WIRE 4 OUT Features For 4 subscribers or 2 IQ subscribers Remote powered by satellite receiver The IF polarity selection is controlled by the remote voltage provided by the receiver: < 14.5 V =...