These tanks will give a surprising amount of volume in a tight space. A couple of things need to be considered. The tank must basically lay flat. It cannot be suspended by straps or ropes. The inlet is via a 38mm (1-1/2") BSP male and outlet via a...

These tanks will give a surprising amount of volume in a tight space. A couple of things need to be considered. The tank must basically lay flat. It cannot be suspended by straps or ropes. The inlet is via a 38mm (1-1/2") BSP male and outlet via a...

Ideal for camping, outdoors or as a temporary water storage solution where drinking water is not accessible. It features an integrated handle for easy lifting and an ergonomic swivel tap that can be moved out of the way when transporting. This jerry can...

Virtually indestructible self venting jerry can.• Child proof lid• High density unbreakable polyethylene• 450(H) x 330(L) x 185(W)mm• Water onlyPackaged DimensionsPackaged Dimensions47.0cm(Length) x 33.0cm(Width) x 18.0cm(Height)

This unit fits through the slop well behind and under your outboard through the transom and then overboard. It is meant for fiberglass boats. You will need to bore a 25mm hole from the very bottom of the slop well, facing slightly downwards (which will...

Spare bung for MPC065.Packaged DimensionsPackaged Dimensions7.5cm(Length) x 3.5cm(Width) x 3.5cm(Height)

Housing similar to MPC045, except flange has flat bottom. Drain hole 35mm dia. 4 x No. 8 screws.Packaged DimensionsPackaged Dimensions6.5cm(Length) x 6.5cm(Width) x 7.0cm(Height)

Spare bung for MPC045.Packaged DimensionsPackaged Dimensions8.0cm(Length) x 3.0cm(Width) x 3.0cm(Height)

UV resistant nylon housing.• Suits 4mm countersunk screws on a 45mm pitchPackaged DimensionsPackaged Dimensions8.0cm(Length) x 6.0cm(Width) x 4.5cm(Height)

The most common sizeFine ThreadYou should keep a spare on the boat...  Packaged DimensionsPackaged Dimensions5.0cm(Length) x 3.0cm(Width) x 2.5cm(Height)

The most common sizeCoarse ThreadYou should keep a spare on the boat...  Packaged DimensionsPackaged Dimensions9.0cm(Length) x 3.0cm(Width) x 3.0cm(Height)

This high quality heavily cast unit is all metal except for a 3mm dia nitrile rubber O-ring seal. The square-cut threads positively engage the bung for a guaranteed water-tight seal. The metal construction ensures no crossthreading or wearing...

• I.D. 30mm• Cutout: 40mmPackaged DimensionsPackaged Dimensions15.7cm(Length) x 9.9cm(Width) x 6.7cm(Height)

• I.D. 30mm• Cutout: 40mmPackaged DimensionsPackaged Dimensions8.5cm(Length) x 7.5cm(Width) x 6.0cm(Height)

Plastic flange.• 18 Hole Dia.• Suits No.8 countersunk screws on a 37mm pitch.Packaged DimensionsPackaged Dimensions5.0cm(Length) x 4.0cm(Width) x 3.0cm(Height)

Standard tapered rubber bung for plugging outlets or sealing small holes.Packaged DimensionsPackaged Dimensions2.5cm(Length) x 2.0cm(Width) x 2.0cm(Height)

Special high pressure unit for washdown systems.Packaged DimensionsPackaged Dimensions16.0cm(Length) x 11.0cm(Width) x 5.0cm(Height)

7.5m of coiled high pressure hose and trigger hose gun.• Factory crimped fittings at each end.Packaged DimensionsPackaged Dimensions44.4cm(Length) x 10.8cm(Width) x 16.0cm(Height)