Industrial Supplies

This model has two fold-out drink holders set into the lid. Moulded in tough ABS and measures 340(W) x 130(H) x 195(D)mm. This unit requires a panel cutout of 300(W) x 100(H)mm and has provision for...

The ball valve is housed in a dense nylon seal housing, which is chrome plated.Packaged DimensionsPackaged Dimensions12.0cm(Length) x 5.0cm(Width) x 2.5cm(Height)

These tanks will give a surprising amount of volume in a tight space. A couple of things need to be considered. The tank must basically lay flat. It cannot be suspended by straps or ropes. The inlet...

Roller bracket for holding a boat roller in place. • 16mm HolePackaged DimensionsPackaged Dimensions12.0cm(Length) x 4.0cm(Width) x 8.0cm(Height)

Roller bracket and stem for holding a boat roller in place. • 155mm Long Stem• 16mm HolePackaged DimensionsPackaged Dimensions23.0cm(Length) x 12.0cm(Width) x 4.0cm(Height)

Ideal for camping, outdoors or as a temporary water storage solution where drinking water is not accessible. It features an integrated handle for easy lifting and an ergonomic swivel tap that can be...

Scepter jerry cans are the perfect solution for camping, hiking, fishing and travelling when you need to transport extra fuel safely. They are virtually indestructible, manufactured from...

Similar to the stainless steel MRI410 series but more economical. Also, the smaller clamps 1/4" and 5/16" are commonly used in cable and pulley steering systems in older boats.MRI405 6mm (1/4")...

Shackles must not break! You want only the very best when there is so much on the line, and we are not just talking about your boat or vehicle, but much more importantly the safety of everyone around...

Shackles must not break! You want only the very best when there is so much on the line, and we are not just talking about your boat or vehicle, but much more importantly the safety of everyone around...

Shackles must not break! You want only the very best when there is so much on the line, and we are not just talking about your boat or vehicle, but much more importantly the safety of everyone around...

Available in 5 colours (one colour per packet - please buy in-store if you want to select a particular colour) • red • blue • yellow • white • greenPackaged DimensionsPackaged Dimensions8.0cm(Length)...

• New type to suit fuel tanks manufactured from 1999 onwards.• Suits MGC340 Fuel Tank Fitting• Plastic body• 3/8" (10mm) hose fittingPackaged DimensionsPackaged Dimensions14.0cm(Length) x 45...

Grade L is low carbon steel chain specifically manufactured to Australian Standard AS2321-2006. Used for anchoring and mooring applications, Grade L calibrated short-link design ensures proper fit...

Roller bracket for holding a boat roller in place. • 16mm HolePackaged DimensionsPackaged Dimensions14.0cm(Length) x 7.5cm(Width) x 4.0cm(Height)

Roller bracket and stem for holding a boat roller in place. • 155mm Long Stem• 16mm HolePackaged DimensionsPackaged Dimensions23.0cm(Length) x 14.0cm(Width) x 4.0cm(Height)

12in Concave Roller Red with 25mm Bore • Viking Rollers 91522 • Softer Red polyurethane roller is more popular for fibreglass hullsPackaged DimensionsPackaged Dimensions7.7cm(Length) x 7.8cm(Width) x...

12in Flat Bilge Roller Red with 25mm Bore • Viking Rollers 91531 • Softer Red polyurethane roller is more popular for fibreglass hullsPackaged DimensionsPackaged Dimensions7.0cm(Length) x 7...