These premium bulbs are bigger than our standard bulbs, and are OK for petrol, petrol/ethanol and diesel fuels.• 10mm (3/8")Packaged DimensionsPackaged Dimensions19.0cm(Length) x 5.0cm(Width) x 2.0cm(Height)

Features gasoline and solvent-resistant construction, stainless steel clamps, and dual internal check valves to ensure a more rapid prime while preventing fuel flow back.Packaged DimensionsPackaged Dimensions17.3cm(Length) x 10.0cm(Width) x 6.1cm(Height)

Standard Primer Bulbs. Our standard ones are still bigger than our competitors'.• 8mm (5/16")Packaged DimensionsPackaged Dimensions16.0cm(Length) x 11.0cm(Width) x 5.0cm(Height)

Chrome plated brass fuel tank breather for through hull mounting.Features:• Right angle hose connection• Suits 5/8" ID vent hose• Accomodates hoses up to 1/2" thick• 20mm mounting hole diameterPackaged DimensionsPackaged Dimensions18...

Chrome plated brass fuel tank breather for through hull mounting.Features:• Straight hose connection• Suits 5/8" ID vent hose• Accomodates hoses up to 1/2" thick• 20mm mounting hole diameterPackaged DimensionsPackaged Dimensions7...

Spare Parts for Outboard MotorsImpeller to suit MGA530/40 15hpMGA543Packaged DimensionsPackaged Dimensions5.0cm(Length) x 5.0cm(Width) x 1.0cm(Height)

Spare Parts for Outboard MotorsPropeller Suits MGA530/40 15hpMGA541Packaged DimensionsPackaged Dimensions22.0cm(Length) x 22.0cm(Width) x 12.0cm(Height)

Spare Parts for Outboard MotorsImpeller to suit MGA520 9.8hpMGA522Packaged DimensionsPackaged Dimensions4.0cm(Length) x 4.0cm(Width) x 1.0cm(Height)

Spare Parts for Outboard MotorsPropeller to suit MGA520 9.8hpMGA521Packaged DimensionsPackaged Dimensions20.0cm(Length) x 20.0cm(Width) x 10.0cm(Height)

Spare Parts for Outboard MotorsPropeller to suit MGA010 5.0hpMGA511Packaged DimensionsPackaged Dimensions18.0cm(Length) x 18.0cm(Width) x 5.0cm(Height)

Spare Parts for Outboard MotorsPropeller to suit MGA500 2.5hpMGA501Packaged DimensionsPackaged Dimensions11.0cm(Length) x 4.0cm(Width) x 4.0cm(Height)

Incredibly, it is actually quite difficult to completely remove salt from cooling systems – even with a good flush with fresh water. Whilst a good flush is OK when you are using the boat daily, it is important to give the cooling system a THOROUGH...

Has plumbing which connects to the water inlets on either side of the outboard leg. Suitable for very large outboards up to 250HP. Hose connector kit supplied. 280mm deep throat.Packaged DimensionsPackaged Dimensions44.4cm(Length) x 13.8cm(Width) x 8...

It is generally a good idea to connect your flusher to the motor (once it is in a secure position) first, connect the hose and turn the hose on. This will pressurise the system and show up any major leaks, etc. This is the time to fix it if it flies off!...

It is generally a good idea to connect your flusher to the motor (once it is in a secure position) first, connect the hose and turn the hose on. This will pressurise the system and show up any major leaks, etc. This is the time to fix it if it flies off!...

It is generally a good idea to connect your flusher to the motor (once it is in a secure position) first, connect the hose and turn the hose on. This will pressurise the system and show up any major leaks, etc. This is the time to fix it if it flies off!...

Ideal for your outboard engine.Packaged DimensionsPackaged Dimensions8.0cm(Length) x 2.2cm(Width) x 1.9cm(Height)

LFR6A spark plug for outboard motors. - Trivalent metal plating for superior anti-corrosion and anti-seizing properties - Corrugated ribs prevent flashover - Pure alumina silicate ceramic insulator for superior strength and better heat...