ELECTRONICS

The IR-PRE1 is a convenient stereo volume control for analog audio system. It accepts the line level signal from the analog unit, and then output to power amplifier or active speakers. The remote controller adjusts the volume ormute of the analog audio...

This unit was designed with the working musician and sound person in mind. The MQS-52features a full selection ofstandard pro audio connectors for testing all such cables. It consists of two RCA jacks, two 1/4" jacks, two XLR jacks sockets, two XLR jacks...

Mini Mic Preamplifier The MQS-51 is designed to provide a simple, compact and inexpensive microphone preamplification for a variety of applications. The unit has both XLR and 1/4" Inputs and Outputs, and a simgle Gain control with a Clip indicator...

Australian Monitor MIXEDUP 4 Channel Mixer The MIXED UP is a passive 4 channel mixer which features 2 balanced XLR microphone inputs and 2 dual RCA line inputs and a single balanced XLR output. The MIXED UP also offers individual front panel level...

Get Down The GET DOWN stereo converter converts a professional line level balanced audio signal to an unbalanced domestic level signal. Inputs are balanced XLRs and outputs are stereo RCA connectors. The GET DOWN also features a front panel level control...

Dual channel hum eliminatorThe BUZZ OFF is a two channel hum eliminator featuring both balanced XLR inputs and outputs and unbalanced RCA inputs and outputs per channel. The BUZZ OFF is ideal for getting rid of hum and extraneous noise from long cable...

For running two mixers at once - perhaps one for the monitorand one for aster out to PA system, or one for broadcast and one for PA, or a performer wants his/her mic split into a powered monitor and the PA - you need the ability to split the signal from...

The MQS75 converts consumer level stereo RCA signals to balanced XLR professional line level, and back. It is the ideal solution for connecting audio sources like CD players,camcorders etc to professional devices like mixing boards, signal processors and...

Unbalanced to Balanced Converter RCA-XLR Unbalanced 10K Ohm 2 x RCA to balanced 600 Ohm 3 pin male XLR with level control. -10dB max signal gain. This unit can be used: for balancing a line level signal (converting an unbalanced signal to balanced as an...

Balanced To Unbalanced Converter XLR-RCA Balanced 600 Ohm 3 pin female XLR to unbalanced 10K Ohm 2 x RCA with level control. +10dB max signal gain. Stepsup input signal by factor of 16, ie 20mV in = 320mV out. This unit can be used: for unbalancing a...

"Hum" noise is a common problem in sound systems, even with the volume control set at minimum level. The HEB-100 isa low-cost tool that you can use to prevent the "hum" causedby ground loop. This unit can also act as a converter of unbalanced signals. ...

24W Bluetooth® Audio Amplifier with DACThe PRO1439 has some nice audio-centric features such as its DAC and binding posts. It also suits loads of different applications in the domestic and commercial space. The 24W Class D amp is surprisingly...