Electronics

Dante What Is Dante? Dante is a complete media networking solution and the de facto standard for digital media networking. Dante distributes uncompressed, multi-channel digital media via standard...

Features •Automatically switches the signals to one power amplifier between two inputs. •Delay Switch allows setting the Delay time from 0.5 Seconds to 2 Minutes to change the music automatically...

For running two mixers at once - perhaps one for the monitorand one for aster out to PA system, or one for broadcast and one for PA, or a performer wants his/her mic split into a powered monitor and...

This unit was designed with the working musician and sound person in mind. The MQS-52features a full selection ofstandard pro audio connectors for testing all such cables. It consists of two RCA...

"Hum" noise is a common problem in sound systems, even with the volume control set at minimum level. The HEB-100 isa low-cost tool that you can use to prevent the "hum" causedby ground loop. This...

Features The POWERPRO300 stereo power amplifier represents the state of art design. Featuring dual inputs with signal sensing, POWERPRO300 amplifier can be configured to turn onautomatically when...

The IR-PRE1 is a convenient stereo volume control for analog audio system. It accepts the line level signal from the analog unit, and then output to power amplifier or active speakers. The remote...

Features Automatically switches the signal to stereo speakersbetween two power amplifiers. Dual Relays handle music power Levels up to 150 Watts. Delay Switch allows setting the Delay time...

Features The SSV series Speaker Selectors are highly efficient dual-source speaker selectors that control pairs of speakers. The front panel provide a separate volume control for each speaker pair,...

UP2 PREAMP FEATURES For all turntables with moving magnet (MM) cartridges or audio devices with line level (e.g. tape decks) External housing, reliably shielded against interference Audio recording...

5.8GHz Wireless Audio Transmitter/Receiver Please note this kit requirestwo of the 5V USB power supplies which are not supplied, refer to the related products below. The UWA-SB5 enables you to...

This IC will allow you to expand the number of input and output pins on your microcontroller. It uses 3 I2C pins to give 8 general purpose input/output pins. It even includes a configurable interrupt...

The MCP3008 is an 8 channel 10 bit ADC (analog-to-digital converter) suitable for use with a microcontroller or single board computer. Great for adding analog inputs to chips that lack it.Features: -...

A highly efficient, fixed voltage, no load low power (<0.2~0.75W) consumption enclosed power supply for a wide range of industrial applications. It is more compact and efficient than previous...

120W slimline DIN rail power supply designed to save space inside power enclosures. Suits ambient temperatures from -20 to 70 degress Celsius.Features:Universal AC InputShort Circuit, Overload,...

HLG-600H series is a high power AC/DC LED driver featuring dual mode constant voltage and constant current output. HLG-600H operates from 90-305VAC and offers models with different rated voltage...

IMPORTANT NOTICE: Product Revision Notice!*12V*Universal AC input / Full range*Built-in active PFC*Fully isolated aluminium case*IP65/67 ingress protection

IMPORTANT NOTICE: Product Revision Notice!*12V*Universal AC input / Full range*Built-in active PFC*Fully isolated aluminium case*IP65/67 ingress protection