Other Tools

Suits G5000, G6100, G6900, G8100, G9500HC

Keep your vehicle protected from high-tech theft with this faraday key pouch. It uses advanced signal-blocking material to prevent relay attacks by isolating your remote key fob as soon as it’s...

FC83B/9M MEDIUM DUTY FLOOR COVER 30X10MM 9M LONG 2x friction-fit connector pins supplied per pack rejoin previously cut lengths or join multiple lengths. Made from flexible PVC with neat tapered...

FC83H/9M MEDIUM DUTY FLOOR COVER 26X12MM 9M LONG 2x friction-fit connector pins supplied per pack rejoin previously cut lengths or join multiple lengths. Made from flexible PVC with neat tapered...

This can also be used to measure the correct thickness of gaps, for example when 3D printing parts or even setting up your 3D printer.Sizes in tool: 0.02 / 0.03 / 0.04 / 0.05 / 0.06 / 0.07 / 0.08 / 0...

Take the frustration out of removing Molex connector pins with these time save tools. Simply slide the tool over the connector and push the plunger to effortlessly remove the pin. Both male and...

Made from a very tough vinyl using a roto-mould process. They are pumped up at low pressure recommended at 1.5 PSI and can be topped up with a manual hand pump or an air pump using a suitable adaptor...

Made from a very tough vinyl using a roto-mould process. They are pumped up at low pressure recommended at 1.5 PSI and can be topped up with Rovin manual hand pump MWA626 or an air pump using a...

Made from a very tough vinyl using a roto-mould process. They are pumped up at low pressure recommended at 1.5 PSI and can be topped up with Rovin manual hand pump MWA626 or an air pump using a...

Made from a very tough vinyl using a roto-mould process. They are pumped up at low pressure recommended at 1.5 PSI and can be topped up with Rovin manual hand pump MWA626 or an air pump using a...

Made from a very tough vinyl using a roto-mould process. They are pumped up at low pressure recommended at 1.5 PSI and can be topped up with Rovin manual hand pump MWA626 or an air pump using a...

Made from a very tough vinyl using a roto-mould process. They are pumped up at low pressure recommended at 1.5 PSI and can be topped up with a manual hand pump or an air pump using a suitable adaptor...

CFWF50A2 FERRET PRO WIFI CAMERA KIT Built in WiFi hotspot, wireless and rechargeable Provides a high resolution live stream with a wireless range up to 15m IP67 dust-proof & waterproof Easy to use,...

Rod, Hook & Magnet bundle for Ferrit inspection camera     Short rod, hook & magnet for Ferret WiFi, Pro, Plus & Sweeps cameras (not suitable for Ferret Lite).

Fibre Transmitter 1550nm +10dBm 1RU 45-2600MHz with Dual Power SuppliesModel: 20MM-LT10L

Fibre Transmitter 1550nm +6dBm 1RU 45-2600MHz with Dual Power SuppliesModel: 20MM-LT06L

This fibreglass cable puller is made with a flat fibreglass rod that is strong and durable and a metal frame that keeps it coiled neatly. It also has two glow-in-the dark wheels that help you see it...

Made from fine fibreglass threads. It is perfect for cleaning, polishing, and burnishing applications on electrical and electronic equipment eg: cleaning contacts, pads, rust & burr removal.