UHF & VHF Antennas

Deck mount base with 2 way tilt and 1" threaded bolt.

MMM1 MARINE M/MNT S/STL

6 Foot 1.8M Salt water resistant Heavy duty radome Fibreglass. Chrome plated brass fittings. Ground independent Antenna. All are consistent appearance for multiple antenna mounting. 1” Threaded base...

Flexible type with spring base for a low-profile, tough mount anywhere! 300W BW=15MHz 2dBi *Ground Independent. Only 360mm tall. Australian made.

Direct to plug connection. Ground independent 1/2 wave. Made with tough nylon tubing covered with polyolefin. This antenna is primarily for hand held transceivers but can be used in other...

Direct to plug connection. Ground independent 1/2 wave. Made with tough nylon tubing covered with polyolefin. This antenna is primarily for hand held transceivers but can be used in other...

Flexible type with spring base for a low-profile, tough mount anywhere! 300W BW=15MHz 2dBi *Ground Independent. Only 360mm tall. Australian made.

Antenna receiving AM & FM frequencies of AM 525kHz to 1.6MHz and FM 88 to 108 MHz providing 2dB Gain on FM. Available as whip only or with an included base and 1.6M fly lead to standard car antenna...

Tune into common radio Stations AM/FM Units Dual band tuned whip 526KHz - 1.6MHz 88MHz - 108MHz. Flexible weatherproof. All Australian Made. MobileOne M3P. Available as whip only or with an included...

Tune into common radio Stations AM/FM Units Dual band tuned whip 526KHz - 1.6MHz 88MHz - 108MHz. Flexible weatherproof. All Australian Made. MobileOne M3P. Available as whip only or with an included...

Key Features:  UHF CB Antenna (3dBi), with 0.46m* fiberglass pole and heavy duty spring base 1m Fiberglass extension pole to convert antenna to a 1.4m 6.5dBi high gain antenna Coaxial cable (4...

Key Features: Heavy duty barrel spring base Fibreglass pole Length of antenna is 668mm* Grub screw and hex key to secure the fibreglass whip Low-loss coaxial cable (4.5m) Pre-terminated cable fitted...

Key Features: Heavy duty barrel spring base Fibreglass pole Length of antenna is 970mm* Grub screw and hex key to secure the fibreglass whip Low-loss coaxial cable (4.5m) Pre-terminated cable fitted...

Replacement 3dBi Whip to suit ANU056.

Key Features: 6.5dBi antenna whip when used with Oricom elevated feed antenna Whip only 4.5dBi Fiberglass Whip will suit the 2U0137,ANU230,2U0202,ANU250 and ANU236 antennas Whip length: 68cm Thread...

Key Features: Replacement fiberglass Whip to suit ANU110,ANU100,ANU215,ANU210 and ANU200 UHF CB Antennas.  Antenna Length: 600mm. The thread size for the whip (not the spring base) is 5/16 UNC. 

Key Features 3dBi 140mm Black Antenna Whip Suits all Oricom elevated feed antennas (ANU100/200/206/210/215/216/220/226/230/240/236/250) Antenna Length: 14cm The thread size for the whip (not the...

600mm Fibreglass Whip to suit the ANU1100/ANU1150 antenna base.