Designed to be a direct replacement for your standard GPO fittings, combining two standard 240AC 10A mains (GPO) outlets with a built-in RCD to provide protection against electrical shock. In the event of a fault with the connected appliance or accident, such as cutting through the mains lead, the unit will provide complete isolation from mains. A test button, status indicator, and reset button allows you to check the RCD, which we recommend should be done each time before use.
Meets Australian and New Zealand safety standards - Type- A
Please Note: This item should be installed by a licenced electrician.
Features:
- Electric shock protection
- LED status indicator
- Reset and test buttons
- Line power indicator
Specifications:
Specifications:
CD Classified: Type II
Rated Tripping Current: 30mA
Operating Speed: <40mS Max.
L/Nin-L/Nout: 2KV
Endurance: 2000 Cycles Minute
Contact Break: Double Pole
Standards: RCD Module-AS NZS 3190, Socket-AS NZS 3112
Minimum Back Box Depth: 35mm
Fixing Screws: M3.0 x 25mm
Cable Capacity: 4x2.5mm2,2x4mm2,1X6mm2
AC Voltage Rating
| AC Voltage rating | 240.0 V |
|---|---|
| AC Frequency | 50.0 Hz |
AC Current Rating
| AC current rating | 20.0 A |
|---|
Plug or Socket
| Device | Socket |
|---|---|
| Plug or Socket Type | Mains AU/NZ 3 Pin |
| Dielectric Withstanding Voltage | 6.0 kV |
Ingress Protection Rating
| Dust/Particle Ingress Protection | 3 - Objects > 2.5mm, Tools, thick wires etc |
|---|---|
| Liquid/Moisture Ingress Protection | 0 - Not protected |
| IP Rating | 30.0 |
Product Dimensions
| Width | 120.0 mm |
|---|---|
| Height | 76.0 mm |
| Depth | 50.0 mm |
| Weight | 144.0 g |
Packaged Dimensions
| Packaged Dimensions | 14.7cm(Length) x 8.1cm(Width) x 5.6cm(Height) |
|---|
