null Skip to main content

10A PWM Solar Charge Controller 12/24V with USB

$79.00
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
E-MP3750
UPC:
9319236730324
Intelligent yet lightweight, this solar controller uses Pulse Width Modulation (PWM) to control battery charging. With total autonomy, its set-and-forget operation means you can get maximum charge into your batteries from your solar installation without having to worry about those things. Suitable for solar panels up to 160W, it provides all the important safety features such as overload, short-circuit, over-discharge, and reverse-polarity protection. A handy feature is also the USB port located on the front panel, to provide up to 1.2A charging - very handy during power outages to keep your phone charged without any additional equipment. Charge modes include bulk, equalise, and float charging, and the unit automatically switches to the best charging mode. Suitable for sealed led acid, as well as Gel/flooded type cells.
 
Note: Solar panel nominal voltage must match battery voltage - eg. 12V solar panel on a 12V battery system.

Features:
- Automatic charge mode selection
- Suitable for 12V and 24V battery banks
- USB charging port on front panel
- Charging Modes: Bulk, Equalise, Float
- Supports: Sealed, Gel and Flooded
- USB Output: 5V @ 1.2A
- Terminals to suit cable up to 4mm2.

Solar Charge Controllers and Regulators

Max Solar Panel Array120.0W,240.0W
Max PV Open Circuit Voltage50.0 V
Max Charging Current10.0 A
Max Load Current10.0 A
Charge Controller TechnologyPulse Width Modulated (PWM)

Operating Temperature and Humidity

Operating Temperature-35.0°C-55.0°C

Ingress Protection Rating

Dust/Particle Ingress Protection2 - Objects > 12.5mm, Fingers or small objects
Liquid/Moisture Ingress Protection0 - Not protected
IP RatingIP20

DC Voltage Rating

DC Voltage12.0V,24.0V

DC Current Rating

DC current rating10.0 A

Included USB Charge Output

Total Current Rating1.2 A
Number of Ports1.0 pc

Low Voltage Power / Vehicle Adaptors

Input TypeScrew Terminal
Output TypeScrew Terminal

Product Dimensions

Length120.0 mm
Width67.0 mm
Height22.0 mm
Weight100.0 g

Packaged Dimensions

Packaged Dimensions13.0cm(Length) x 8.1cm(Width) x 3.8cm(Height)
Adding to cart… The item has been added