What a feature packed Solar Controller! Using Maximum Power Point Tracking (MPPT) for maximum efficiency and charge rate, able to charge lead acid (sealed, gel or flooded) or lithium battery banks between 8V to 32V, and supporting 12V solar arrays up to 580W or 24VDC arrays up to 1170W, it suits a huge range of applications. It features bulk, constant and float charge stages for rapid, efficient and safe battery charging, with feedback on charge status, current, voltages, etc. shown on the LCD screen. Built into a durable case for permanent installation with heavy duty screw terminals for cabling up to 8AWG.
Note: Maximum Charge output is limited to 30A if the Solar Panel input is greater than 390W on 12V or 780W on 24V systems.
Features:
- Advanced MPPT control technology
- High tracking and conversion efficiency
- Supports Sealed, Gel or flooded lead acid and Lithium batteries
- 3-stage intelligent charging
- Multiple load work modes
- Extensive electronic protection
- Backlit LCD display
- RS485 communication
- Common negative grounding
Specifications:
Compatible Battery Bank Voltages 12 / 24VDC Selectable
Solar Input Voltage: 16 - 100VDC
Maximum Solar Array Size: 580W/12VDC , 1170W / 24VDC
Maximum Charge Output: 30A
Maximum Load Current: 30A
Dimensions: 228(H) x 164(W) x 55(D)mm, 1.26kg
Maximum Load Current: 30A
Dimensions: 228(H) x 164(W) x 55(D)mm, 1.26kg
Battery support:
- Sealed, gel or flooded Lead-acid (8~17V/12V; 18~32V/24V)
- LiFePO4 (12V/24V)
- LiNiCoMnO2 (12V/24V)
- LiFePO4 (12V/24V)
- LiNiCoMnO2 (12V/24V)
RTS temperature sensor sold separately: MP3771
Solar Charge Controllers and Regulators
| Max Solar Panel Array | 390.0W,780.0W |
|---|---|
| Max PV Open Circuit Voltage | 100.0 V |
| Max Charging Current | 30.0 A |
| Charge Controller Technology | Maximum Power Point Tracking (MPPT) |
Product Dimensions
| Length | 228.0 mm |
|---|---|
| Width | 164.0 mm |
| Height | 55.0 mm |
| Weight | 1.0 g |
Packaged Dimensions
| Packaged Dimensions | 25.5cm(Length) x 18.6cm(Width) x 7.7cm(Height) |
|---|
