Standard belt drive turntable with external AC power supply (Black)
FULLY AUTOMATIC BELT DRIVE - STYLUS & PREAMP OUTPUTS
AT-LP60X fully automatic belt-drive turntable is an affordable, easy-to-use turntable that plays both 33⅓ and 45 RPM records and, with its built-in switchable phono preamp, can be connected directly to your home stereo, powered speakers, computer and other components, whether they have a dedicated phono input or not. The ATLP60X features a redesigned tonearm base and headshell to improve tracking and reduce resonance. Noise is further reduced by the inclusion of an AC adaptor that moves the AC/DC conversion outside of the chassis where its impact on the signal chain is limited.
The turntable comes with a detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM record adaptor, and a removable hinged dust cover.
- Experience the high-fidelity audio of vinyl
- Fully automatic, two-speed (33⅓, 45 RPM) belt-drive.
- Anti-resonance, die-cast aluminium platter
- Redesigned tonearm base and headshell for improved tracking and reduced resonance
- Integral Dual Magnet™ phono cartridge with replaceable diamond stylus (ATN3600L)
- AC adaptor handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
- Built-in switchable phono pre-amplifier for phono- or line-level output
- Accessories: RCA output cable, 45 RPM record adaptor, and dust cover.
Motor DC servo-controlled
Speeds 33-1/3 RPM, 45 RPM
Turntable Platter Aluminium
Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio >50 dB (DIN-B)
Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec, Pre-amp “LINE” 150 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
Power Supply Requirements 240V AC, 60 Hz, 3W
Dimensions 359.5mm W x 97.5mm H x 373.3mm D
Accessories Included 3.5mm mini-plug (male) to dual RCA (male) output cable; 45 RPM adapter; removable hinged dust cover
Replacement Stylus ATN3600L
