This filamant is from a recognised manufacturer and is so cheap you can use it for everyday Protoyping without breaking the bank.
It is PLA so will not run well at high speeds but is well suited to slower speed printing.
Creality Ender-PLA filaments are suitable to use on your FDM (Fused Deposition Modeling) 3D printer with little to no change to your regular PLA settings.
PLA (modified PolyLactic Acid) is extracted and purified from corn grain for an environmentally friendly composition. It is low odour and users report a slight, sweet aroma while printing.
Features:
- Affordable and Cost Effective for Beginners and great for prototyping
- Good Compatibility, Simple Operation
- Neat Winding, Less Tangle
- Stable Wire Diameter, No Clogging
- Biological Material, Environmental Friendly
Printer Settings:
- Printing Temperature: 200-220℃
- Bed Temperature: 0-70℃
- Recommended Printing Speed: 50 mm/s
- Movement Speed: 90-150mm/s
3D Printer Filament
| Material Type | PLA |
|---|---|
| Colour | Green |
| Max Bed Temperature | 60C |
| Max Nozzle Temperature | 210C |
| Max Printing Speed | 100mm/s |
| Nominal Roll Weight | 250g |
| Filament Size | 1.75mm |
Product Dimensions
| Length | 2.0 mm |
|---|---|
| Width | 2.0 mm |
| Height | 750.0 mm |
| Weight | 1.0 kg |
| Diameter | 52.0 mm |
Packaged Dimensions
| Packaged Dimensions | 21.2cm(Length) x 21.2cm(Width) x 7.3cm(Height) |
|---|
