Electronics

- Temperature Range: -40°C ~ +105°C - Capacitance Tol erance: ±20% @ 120Hz 20°C RB Electrolytics - Reduceddim ensions - Extended temperature rating - Ultra low le akage - Improved tan loss angle -...

Very high capacitance per vol, excellent electrical performance & stabilityagainst both temp. and time. Suitable for a wide range of general purposeapplications: coupling, decoupling filters and...

Very high capacitance per vol, excellent electrical performance & stabilityagainst both temp. and time. Suitable for a wide range of general purposeapplications: coupling, decoupling filters and...

Military grade flexible tubing suitable for insulation, colour coding, strain relief and protection. Continuous temperature rating is -55°C to 135°C and up to 300°C for short durations. The shrink...

Our heatshrink is flexible and made from flame-resistant polyolefin.- Made to UL224 E180908 125°C.- It shrinks to 50% of its size.- Shrink with a heatgun, hairdryer or a gas burner, match etc.Product...

10MM BLUE HEATSHRINK Highly flexible Flame retardant (except clear) Abrasion and impact resistant For use in all electrical and electronic applications In-house cutting facility available for cut...

Our heatshrink is flexible and made from flame-resistant polyolefin.- Made to UL224 E180908 125°C.- It shrinks to 50% of its size.- Shrink with a heatgun, hairdryer or a gas burner, match etc.Product...

Features:10mm Cable Clamps - Pk.6Cable TiesPack Quantity6.0 pcCarton 2 DimensionsDiameter10.0 mmPackaged DimensionsPackaged Dimensions7.5cm(Length) x 7.5cm(Width) x 1.5cm(Height)

Our heatshrink is flexible and made from flame-resistant polyolefin.- It shrinks to 50% of its size.- Shrink with a heatgun, hairdryer or a gas burner, match etc.Product DimensionsLength1.2...

10MM CLIPS FOR LED STRIP

These are virtually flush mount on the underside of the chassis.- PCB hole 4mm.- Chassis hole 5.5mm- Chassis thickness 0.8- 1.2mm.- Two heights available.Pack Height25 10mmSpacers and...

Our heatshrink is flexible and made from flame- resistant polyolefin.- Made to UL224 E180908 125°C.- It shrinks to 50% of its size.- Shrink with a heatgun, hairdryer or a gas burner, match etc...

10mm Green/Yellow Heatshrink TubingProduct DimensionsLength1.2 mDiameter10.0 mmHeatshrink TubingHeatshrink Tube Diameter10.0 mmHeatshrink Length1.2 mShrink Ratio2:1Rated Voltage600.0 VHaloge

Heavy duty crimp terminal for connecting battery banks. 10mm stud size. Suits up to 50mm² cable (approx 1/0AWG). Suits W 4190A and W 4191A. Sold individually.

BlackRequires a 14mm panel holeSimply push clip in panel and insert LEDPack of 5Packaged DimensionsPackaged Dimensions8.0cm(Length) x 5.5cm(Width) x 2.0cm(Height)

10MM LED STRIP END CAP

Allows easy connection cut of LED strip lighting to a power supply. One end is fitted with an 10mm two pin connection with press fit clip, the other end is fitted with a 2.1mm DC power socket for...

A packet of 4 10mm non-insulated 50A eye terminal connectors for cable sized up to 25mm squared. These lugs are best attached via a specialized crimping tool for optimum conductivity and secure fit...