eSUN PLA (PolyLactic Acid) Resin is a Bio-Based formula extracted from corn, which is environmentally friendly and EN71-3 toy standard certified.
Features:
• Environmentally friendly.
• Low smell.
• High precision.
• High hardness and good wear resistance.
• Good moisture-resistance.
Specifications
• Wavelength (nm) : 395-405
• Density (g/m3) : 1.07-1.13
• Viscosity (25°, MPa.s) : 200-300
• Hardness (Shore D) : 75-80
• Tensile Strength (MPa) : 35-50
• Elongation at Break (%) : 20-50
• Flexural Strength (MPa) : 40-60
Features:
• Environmentally friendly.
• Low smell.
• High precision.
• High hardness and good wear resistance.
• Good moisture-resistance.
Specifications
• Wavelength (nm) : 395-405
• Density (g/m3) : 1.07-1.13
• Viscosity (25°, MPa.s) : 200-300
• Hardness (Shore D) : 75-80
• Tensile Strength (MPa) : 35-50
• Elongation at Break (%) : 20-50
• Flexural Strength (MPa) : 40-60
3D Printer Resin
| Consumable Type | PLA Resin |
|---|---|
| Colour | Orange |
| Resin Bottle Size | 500g |
| Normal Layer Exposure Seconds | 2.0-2.5 |
| Bottom Exposure Seconds | 25-35 |
| Bottom Layers Seconds | 4-8 |
| Layer Height mm | 0.05 |
| Lift Speed mm | 40-60 |
| Colour Category | Orange |
Product Dimensions
| Length | 95.0 mm |
|---|---|
| Width | 125.0 mm |
| Height | 220.0 mm |
| Weight | 650.0 g |
Packaged Dimensions
| Packaged Dimensions | 8.9cm(Length) x 8.8cm(Width) x 22.0cm(Height) |
|---|
