The all new eSUN PLA+ filaments are suitable to use on your FDM (Fused Deposition Modeling) 3D printer with little to no change to your regular PLA settings.
PLA+ (modified PolyLactic Acid) is extracted and purified from corn grain for an environmentally friendly composition. It is low odour and users report a slight, sweet aroma while printing.
Features
- Good balance of strength, rigidity and toughness for strong impact resistance.
- 100% bio-degradable and FDA food safety approved.
- Ready to print on any open source desktop or industrial printer.
- Low shrinkage rate means a uniform diameter so you won't get any cracking or issues being brittle.
- Up to ten times stronger than standard PLA.
- Delivers exceptional performance consistently.
- The easiest to work with and most importantly USER FRIENDLY!
Printer Settings
- Best Printing Temperature：200-220℃.
- Bed Temperature：0-70℃.
- Printing Speed：30~90mm/s.
- Movement Speed ：90~150mm/s.
3D Printer Filament
| Material Type | PLA+ |
|---|
| Colour | Yellow |
|---|
| Max Bed Temperature | 80°C |
|---|
| Max Nozzle Temperature | 225°C |
|---|
| Max Printing Speed | 60mm/s |
|---|
| Nominal Roll Weight | 1kg |
|---|
| Filament Size | 1.75mm |
|---|
3D Printer Hardware
| Maximum printing speed | 50-60mm/s |
|---|
| Max Nozzle Temperature | 225.0 °C |
|---|
| Max Bed Temp | 60-80c |
|---|
Product Dimensions
Packaged Dimensions
| Packaged Dimensions | 21.7cm(Length) x 21.4cm(Width) x 7.7cm(Height) |
|---|
