Phrozen Protowhite Rigid Resin – 1kg

Protowhite Rigid Resin – Design Prototyping Made Easy

Empowered by one of the most prestigious chemical company BASF Forward AM , Phrozen Protowhite Rigid Resin enables designers to conduct in-house prototypes efficiently before moving onto the manufacturing stage.

SPECIFICATIONS

• Density: 1.1 g / cm3
• Viscosity 30°C: 220 mPas
• E Modulus: 2300 MPa
• Ultimate Tensile Strength: 57 MPa
• Elongation at Break: 15 %
• Flexural Modulus: 1920 MPa
• Flexural Strength: 94 MPa
• Charpy notched, 23 °C: 1.9 kJ/m²
• HDT at 1.82 MPa: 49 °C
• Surface Hardness, Shore D: 77 Shore D

BENEFITS

• Rigid Resin Empowered by BASF Forward AM: Phrozen Protowhite Rigid Resin empowers industrial designers to solve design challenges and increase efficiency during the design validation phase by creating rigid and impact resistant 3D models.
• Visualize Your Design Ideas With Ease: Turn conceptual ideas into complex 3D models to showcase small batches of high-quality prototypes for more efficient communication.
• Best for Prototype Developments: Experiment and compare various 3D printed prototypes such as mechanical parts, jigs, fixtures, and glasses to refine design usability.
• Save Time With Rapid Prototyping: Demonstrate 3D models and gather feedback from peers to identify improvements and reduce risks of design defects before going into full-scale production.

PRECAUTIONS

• Way to Rinse: Clean with alcohol spray with an air gun. DO NOT immerse the model into alcohol for a long time.
• Use and preserve resins in room temperature, and in dark and ventilated conditions
• Shake well before each use
• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
• Keep resin away from kids and away from direct sunlight exposure
• Wear gloves and masks during the operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
• DO NOT dump resin. Please cure it and treat it as general plastic garbage.
• After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year.
• Post-processing note: For best results, please allow your print to dry for 40 to 60 minutes after wash, then postcure on both sides, 30 minutes per side.
• Minor color differences between the printed parts and website pictures do not impact the final performances.