This Dante 2CH screw terminal Output Adapter is an audio transmitter based on the Dante Ultimo 2x2 solution. It converts two-channel balanced/unbalanced analog audio into Dante 2CH digital audio, then transmits the audio to the receiving end through network (Dante). Analog audio input supports 5-level sensitivity adjustment. The adapter supports local USB-C port power supply and PoE function.
Features:
- Two-channel analog audio to Dante 2CH digital audio
- Balanced/unbalanced screw terminal analog audio input
- Dante audio sampling rate supports 44.1/48/88.2/96KHz@24bit
- Dante audio delay supports 1/2/5ms (configurable)
- Analog audio input supports 5-level sensitivity adjustment (+24dBu, +4dBu, 0dBu, 0dBv, -10dBv)
- Compatible with AES67 input and output.
- Supports local USB-C port power supply and PoE function (Class 0 802.3af PoE)
- Compact design for easy and flexible installation
Specifications:
Technical
Input: Dante® 2CH digital audio
Output: Two-channel balanced/unbalanced analog audio
Control Method: Dante® Controller
Network Bandwidth: 100Mbps
Audio Latency: Configurable Dante® device latency (Supports 1, 2 or 5ms configurable using Dante® Controller)
Transmission Distance: 100m (CAT6/6A/7)
ESD Protection: IEC 61000-4-2: ±8kV (Air-gap discharge) & ±4kV (Contact discharge)
Audio Formats:
DANTE IN [Digital audio input, PCM 2CH
44.1K-96KHz 16/24bit]
LINE OUT [Analog audio output, Balanced/unbalanced
2CH, Max output level +18dBu]
Audio Parameters (Line Out)
Output Impedance: 600 Ohm balanced, 300 Ohm unbalanced
Line Output Level (Maximum): +18dBu (6.15Vrms) @ balanced audio, +12dBu (3.08Vrms) @ unbalanced audio
Frequency Response: 20Hz to 20kHz: (-/+0.5dB)
Dynamic Range >100dB@0dBu, 1kHzA-weighted
Audio S/N Ratio >100dB@0dBu, 1kHzA-weighted
Audio THD+N: < 0.01% at +4dBu, 1KHz
Audio Output Sync Delay: <10ms
Connection
Input port: 1x DANTE [RJ45 connector, PoE], 1x POWER [USB-C with USB power only, 12-pin female]
Output port: 2x CH1/CH2 LINE OUT [6pin-3.5mm phoenix connector]
Others: 1x RESET button [System reboot button]
Mechanical
Housing: Metal Enclosure
Colour: Black
Dimensions: 115W x 40D x 28Hmm
Weight: 94g
Power Supply: USB input: 5V/500mA, PoE input: PoE IEEE802.3af Class 0
Power Consumption: 1.25W (Max)
Operating Temperature: 0°C ~ 40°C
Storage Temperature: -20°C ~ 60°C
Operating Humidity: 20% ~ 80% RH (relative humidity, non-condensing)
Storage Humidity: 10% ~ 90% RH (relative humidity, non-condensing
