This Dante® 2CH Bluetooth Input Adapter is an audio transmitter based on the Dante® Ultimo 2x2. It converts two-channel Bluetooth audio into Dante® 2CH digital audio, then transmits the audio to the receiving end through network (Dante®). The adapter supports local USB-C port power supply and PoE function.
Package Contents
1x Dante® 2CH Bluetooth Input Adapter
2x Hook & Loop Ties
1x User Manual
Features:
- Two-channel Bluetooth audio to Dante® 2CH digital audio
- Supports Bluetooth V5.1, SBC/AAC/APTX/APTX-LL/APTX-HD, up to 192KHz@24bit
- Dante® audio sampling rate supports 48KHz@24bit
- Dante® audio delay supports 1/2/5ms (configurable)
- Supports local USB-C port power supply and PoE function (Class 0 802.3af PoE)
- Compact design for easy and flexible installation
Specifications:
Technical:
Input: Two-channel bluetooth audio
Output: Dante® 2 channel digital audio
Control Method: Dante Controller
Video Network Bandwidth: 100M
Audio Latency: Configurable Dante® device latency (Supports 1, 2 or 5ms configurable using Dante® Controller)
Audio Formats: Bluetooth IN [Digital audio input, PCM 2CH 44.1K-192KHz 16/24bit]. DANTE OUT [Digital audio output, PCM 2CH 48KHz 16/ 24bit]
Transmission Distance: 100m (CAT6/6A/7)
ESD Protection: IEC 61000-4-2: ±8kV (Air-gap discharge) & ±4kV (Contact discharge)
Audio Parameters:
Input Impedance: N/A
Line Input Level (Maximum): N/A
Frequency Response: 20Hz to 20kHz (-/+0dB)
Dynamic Range: >100dB@2Vrms, 1kHzA-weighted
Audio S/N Ratio: >100dB@2Vrms, 1kHzA-weighted
Audio THD+N: < 0.01% at 0dBV, 1KHz
Connection:
Input port: 1x POWER [USB-C port, 12-pin female] 1x Bluetooth Input [Wireless]
Output port: 1x DANTE [RJ45 connector, PoE]
Others: 1x RESET button [System reboot button] 1x PAIR button 1x STATUS LED
Mechanical:
Housing: Plastic Enclosure
Colour: Black
Dimensions: 115W x 40D x 28Hmm
Weight: 93g
Power Supply: USB input: 5V/500mA, PoE input: PoE IEEE802.3af Class 0
Power Consumption: 0.65W (Max)
Operating Temperature: 0°C ~ 40°C
Storage temperature: -20°C ~ 60°C
Operating Humidity: 20% ~ 80% RH (relative humidity, non-condensing)
Storage Humidity: 10% ~ 90% RH (relative humidity, non-condensing)
