This wallplate is a Bluetooth audio receiving panel, with a 3.5mm TRS line level input and stereo RCA Line level outputs. When paired with a compatible Bluetooth-enabled device, the panel receives stereo audio from the Bluetooth source, and converts to the two Dante audio channels via a standard CATx cable with an RJ-45 connector. Power is provided by using PoE (Power over Ethernet), or DC24V power supply, and features high-quality circuits to provide studio-grade performance without worrying about ground loops or other common audio problems. High performance, simplicity of operation, and efficiency of installation makes this wallplate ideal to use for installed sound systems, teleconferencing, etc.
To change Bluetooth name on this device, the supplier provides an iOS app and Android app.
Features:
- Dante Interface 2 input and 2 output channels.
- Converts 2 channels of Bluetooth or 3.5mm TRS audio signal to the Dante network.
- Converts 2 channels of Dante audio to unbalanced RCA audio outputs
- Easy Bluetooth connection by a single button.
- Status LED indication on the front panel.
- Good compatibility with most smartphones, tablets, or other Bluetooth devices.
- Power supply via PoE network switch or DC24V input.
- Simply audio configuration and routing by using Dante Controller.
Specifications
Input: BT stereo L (CH1) / R (CH2), 3.5mm TRS L (CH1) / R (CH2)
Output: RCA L (CH1) / R (CH2)
Output impedance: <600 Ohm (RCA)
Input impedance: >15K Ohm (3.5mm TRS)
S/N: >96dB A-weight
THD+N: <0.05% @ 1KHz
Frequency response: 20Hz - 18KHz
Bluetooth: 5.1 / SBC / AAC
BT sampling rate: 24 Bit / 48KHz
Dante AES67 Interface: 2 in / 2 out
Network connection: RJ45 x 1
Power supply: 802.3af PoE or DC 24V 750mA input
