These are usually used to give an electrically common point for each wiring but are also useful for low voltage tie points, especially on boats or RV's, Caravans etc., 6 holes accept up to a 4.5mm wire bundle and the outer 2 a 6.0 bundle. The Busbar has insulated standoffs at each end, which can be removed so that the assembly can be screwed directly to a chassis. The standoffs have a conservative insulation rating of 1000V.
Features:
• All screws M4.0 Brass bar 9.0 x 6.0
Terminal Barriers & Strips
| Type | Busbar |
|---|
| Device | 6-Way 100A |
|---|
| Length | 110mm |
|---|
| Number of Contacts | 6.0 |
|---|
| Terminal Spacing | 5.08mm |
|---|
| Attachment Method | Screw |
|---|
| Body Material | Polyamide |
|---|
| Contact Material | Phos. Bronze |
|---|
| AC Voltage Rating | 300V |
|---|
| AC Current Rating | 15A |
|---|
| Insulation Dielectric Voltage Rating | 2000V AC |
|---|
| Insulation Resistance | 500MΩ |
|---|
Product Dimensions
Carton 1 Dimensions
| Length | 65.0 mm |
|---|
| Dimension for | Other (details below) |
|---|
| Dimensions details | Without Standoffs |
|---|
Packaged Dimensions
| Packaged Dimensions | 9.6cm(Length) x 1.3cm(Width) x 2.8cm(Height) |
|---|
