This pre-assembled module is a space and weight saver, packaged into a small yet reliable form factor. It's simple to connect and configure to your needs. This low-powered DC converter is useful for many applications, for example, where you need 4.5V for a portable radio but only have a 9 volt transformer. It could also be used to improve the portable potential of a project during prototyping, such as using a 12V battery for an LED strip that is controlled with a 5V Arduino. Just select the appropriate regulated voltage from between 3 and 15VDC. Output current capability is around 1.5 Amps. All in all, quite a handy little module!
Output Voltages: 3V, 5V, 6V, 9V, 12V & 15V
Note: Input voltage MUST be higher than the required output voltage.
DC to DC Converter
| Output Type | Bare Leads |
|---|
| Number of Outputs | 1.0 pc |
|---|
Power from Plugpack
| DC Plugpack Voltage | 3.0V,15.0V |
|---|
| DC Current Draw | 1.5 A |
|---|
| Item Connection | Bare Leads |
|---|
Power Conversion and Transformation
| Type of converter or transformer | DC to DC |
|---|
Product Dimensions
| Length | 63.0 mm |
|---|
| Diameter | 24.0 mm |
|---|
Packaged Dimensions
| Packaged Dimensions | 12.0cm(Length) x 9.5cm(Width) x 4.5cm(Height) |
|---|
