Powertran 240/25+25 30VA Toroidal Transformer

These low profile 30VA transformers will fit inside our 1 Unit 19" rack cases. Toroidal transformers are becoming increasingly popular due to their improved magnetic properties and also that they can be made to a lower profile than a standard solenoid core transformer, allowing for equipment of similar power to be of a lower profile such as rack mounted devices. The advantage of the toroidal (donut) shape is that due to its symmetry the amount of magnetic flux that escapes outside the core (leakage flux) is minimised, therefore it radiates less electromagnetic interference (EMI) to nearby circuits or equipment. EMI is of increasing importance in modern low power, high frequency electronics. Note: Must be used with a 500mA external AC fuse. Note: Manufacturers please note, we recommend that a sample is obtained to confirm suitability The entire range has been tested and approved to the Australian standard AS/NZS 61558.2.6. This standard is equivalent to the European standard EN61558.2.6 making the transformers suitable for the European market (where 240V is used). Attention OEM Customers: Please contact our parent company Altronic Distributors for extremely competitive wholesale pricing. Variations or custom toroidals available. Minimum order quantity applies. Included Mounting Hardware 1 x Mounting Plate 1 x Gasket 1 x Mounting Bolt 1 x Nut Wiring Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series. Mounting Features Supplied with 1 rubber washer, bolt and nut. Lower electrically induced noise demanded by compact equipment. High efficiency enabling conservative rating whilst maintaining size advantages. The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.