This Dante 2CH XLR Output Adapter is an audio converter based on the Dante Ultimo 2x2 solution. It converts Dante 2CH digital audio into two channel balanced/unbalanced XLR analog audio. Analog audio output supports 5-level gain adjustment. The adapter supports local USB-C port power supply and PoE function.
Features:
- Dante 2CH digital audio to two-channel XLR analog audio
- Balanced/unbalanced XLR analog audio output
- Dante audio sampling rate supports 44.1/48/88.2/96KHz@24bit
- Dante audio delay supports 1/2/5ms (configurable)
- Analog audio output supports 5-level gain adjustment (+18dBu, +4dBu, 0dBu, 0dBv, -10dBv)
- Compatible with AES67 input and output.
- Supports local USB-C port power supply and PoE function (Class 0 802.3af PoE)
- Compact design for easy and flexible installation
Specifications:
Technical:
Input: Dante 2CH digital audio
Output: Two-channel balanced/unbalanced XLR analog audio
Control Method: Dante Controller
Video Network Bandwidth: 100M
Audio Latency: Configurable Dante device latency (Supports 1, 2 or 5ms configurable using Dante Controller)
Audio Formats: DANTE IN [Digital audio input, PCM 2CH 44.1K-96KHz 16/24bit] XLR OUT [Analog audio output, Balanced/unbalanced 2CH, Max input level +24dBu]
Transmission Distance: 100m (CAT6/6A/7)
ESD Protection: IEC 61000-4-2: ±8kV (Air-gap discharge) & ±4kV (Contact discharge)
Audio Parameters:
XLR Analog Audio Out
Output Impedance: 600 Ohm balanced, 300 Ohm unbalanced
Line Output Level (Maximum): +18dBu (6.15Vrms) @balanced audio, +12dBu (3.08Vrms) @unbalanced audio
Frequency Response: 20Hz to 20kHz (-/+0.5dB)
Dynamic Range: >100dB@0dBu, 1kHzA-weighted
Audio S/N Ratio: >100dB@0dBu, 1kHzA-weighted
Audio THD+N: < 0.01% at +4dBu, 1KHz
Audio Output Sync Delay: <10ms
Connection:
Input port: 1x DANTE [RJ45 connector, PoE], 1x POWER [USB-C with USB power only, 12-pin female
Output port: 2x CH1/CH2 XLR OUT [XLR male plug, with 30cm cable
Others: 1x RESET button [System reboot button], 2x SENSITIVITY knob [5-level dip switch]
Mechanical:
Housing: Plastic Enclosure
Colour: Black
Dimensions: 115mm [W] x 40mm [D] x 28 mm [H]
Weight: 173g
Power Supply: USB input: 5V/500mA, PoE input: PoE IEEE802.3af Class 0
Power Consumption: 1.25W (Max)
Operating Temperature: 0°C ~ 40°C
Storage temperature: -20°C ~ 60°C
Operating Humidity: 20% ~ 80% RH (relative humidity, non-condensing)
Storage Humidity: 10% ~ 90% RH (relative humidity, non-condensing)
